How to building a quadcopter drone project?

quadcopter drone project

Designing and building a quadcopter drone can be a fun and challenging project. Here are some basic steps to help you get started

Define the Purpose and Specifications: Determine what the quadcopter will be used for and the requirements it needs to meet. Consider factors such as size, weight, flight time, payload capacity, and flight range.

Select the Components: Choose the right components that meet your specifications. These include the frame, motors, propellers, flight controller, battery, and remote control.

Assemble the Drone: Follow the instructions provided with the components to build the drone. Begin with the frame and then attach the motors, propellers, and other components. Make sure everything is properly connected and secured.

Install the Flight Controller: The flight controller is the brain of the drone and controls the movement and stability of the quadcopter. Install the flight controller according to the manufacturer's instructions.

Configure the Flight Controller: Once the flight controller is installed, configure it using a software interface. Set up the parameters such as motor control, stabilization, and GPS if necessary.

Test and Calibrate: Before taking your drone for its first flight, perform a pre-flight check and calibration to ensure that everything is working properly. Test the drone indoors or in an open space, away from people and obstacles.

Fly the Drone: Once the drone is ready, it's time to take it for a flight. Start with simple maneuvers and gradually increase the complexity. Always keep an eye on the drone and ensure it stays within the range of the remote control.

Remember, building and flying a quadcopter drone requires patience and careful attention to detail. Always follow safety guidelines and local regulations.

FD-1660 long endurance quadcopter drone

FD-1660 long endurance drone

FlyDragon FD1660  is a long flight time six axis carbon fiber drone , FlyDragon FD1660 is made of carbon fiber material which features light weight and high strength, the canopy of FD1660 is made of glass fiber so that the GPS signal won’t be blocked. The closed fuselage structure can protect FD1660 from the rain and dust, and also protect other load equipments like flight control and battery.
FD1660 can be applied in many fields like aerial photography, emergency rescue, reconnaissance mission, power line inspection, remote sensing survey and mapping etc.

We suuply drone frame, PNP or RTF


Aircraft Type: Hexacopter
Wheelbase: 1660mm
Airframe Material: Carbon Fiber And Composite Materials
Package Size: 400*730*930mm
Drone frame Weight : 2.7kg
Max. Take-Off Weight:26kg
Max. Payload: 12kg
Flight time: 120minutes(without payload)
80minutes(3KG payload)
40minutes(10KG payload)
Max. Climb Speed: 4m/s
Cruise Speed: 10m/s
Max. Flying Speed: 15m/s
Max. Altitude AMSL: 4000m
Hovering Accuracy:Vertical ±1m, Horizontal±1.5m
Max. Wind Resistance: Level 6
Operation Temperature: -20~60℃
IP Rating:IP56

drone Frame Features:

– TORAY 3K Carbon fiber material
– Light-weight, durable and stable
– Rainrproof
– Long flight time
– Detachable arm, easily portable