RPP-MW-B1 Ship Derusting Robot
RPP-MW-B1 model ship derusting robot using hydro blasting technique, Both spot and continuous blasting are available with the same robot, Combining ultra-high pressure water jetting for hull and cargo hold cleaning and derusting and the vacuum recovery tray for 100% wastewater recycling, can effortlessly perform cleaning and derusting operations on hull, deck and cargo hold, regardless of surfaces - vertical, inclined or curved.
Size: 786 mm (L) X 1154 mm (W)X 550 mm (H)
Weight: 90 kg
Power: 1.2 Kw
Obstacle crossing: ≤15 mm
Max. speed: 8 m/min
Cleaning width： 300 mm
Power： supply AC 220 V
Min. curvature radius： 10
Level of protection： IP65
16 - 50 m²/h (Efficiency varies with operator proficiency, coating type, and water pressure)
Cleanliness： Wa 2.5
UHP pump：Pressure: 2500-2800Bar
Flow rate: >38 L/min
Recycling pump：Vacuum: >0.04Mp
High performance with 100% wastewater recycling
Wastewater recovery vacuum pressure: 0.04 MPa.
Strong adhesion and large payload
Payload capacity is 135 Kg and load weight ratio is up to 1.5:1, satisfying demands for most scenarios.
Strong curvature and obstacle crossing adaptability
Workable on surfaces with a radius of curvature of 1 m; height of obstacles the robot can cross is up to 15 mm.
Detachable modular design
Units of the robot are modularized and can be assembled in half an hour.
Incredible performance and maneuverability
Differential drive, 360° rotation, movement in any direction and remote control.
Safety and reliability
Permanent magnets, a double fall arrest system, IP 65 for safety and reliability.
Contact: Fly Dragon Drone Tech.
Email: export at dronefromchina.com
Add: NO. 9 Dayu Road PiDu distric, ChengDu 611730, China